Espanha 2020/21 Secagem de óleo e papel de transformador

Cenário 3 transformadores monofásicos instalados em uma central termoelétrica no sul da Espanha   Características técnicas do transformador: Fabricante: xxx Ano: 1977 Potência [MVA]: 216 Tensão [KV]: 220/22 Massa de óleo [Kg]: 15.650 cada um Problema As análises periódicas do óleo mostravam uma condição de hidratação do isolamento celulósico. O teor estimado de água nos isolantes sólidos estava entre 3
Leia mais

Não encontrou o que estava procurando? Entre em contato conosco para saber mais sobre o seu caso.

Locais no mundo Sea Marconi Technologies s.a.s. Via Ungheria 20 10093 Collegno (Torino), Italia Tel : +39 011 234.34.34 Fax: +39 011 234.34.35 eMail: info@seamarconi.it pec: seamarconi@pec.it Sea Marconi Envirotech Italia S.r.l. via De Actis contrada Temerano 73050 Seclì (Lecce), Italia Tel: +39 0836 61.02.70 Fax: +39 0836 61.92.66 eMail: info@seamarconi.it pec: seamarconi.envirotech@pec.it Sea Marconi Energia y Medio Ambiente s.l. Poligono Ind.
Leia mais

Enchimento de um transformador sob vácuo e tratamento subsequente do óleo Bélgica 2014

Situation A global leader in the energy sector Technical specifications of transformer: Manufacturer: xxx Year: 2013 (new) Power [MVA]: 185 Voltage [kV]: 380/150 Oil mass [kg]: 50.940 Problem Transformer empty following transport to destination site. Solution Estratto del rapporto di prova con esiti analitici dell’olio a fine intervento Sea Marconi implemented the following measures: Filling the transformer under vacuum and
Leia mais

Enchendo um transformador sob vácuo e tratamento subsequente do óleo França 2013

Situation Twin transformers installed in a quarry: Manufacturer: xxx Year: 1980 Power [MVA]: 250 Voltage [kV]: 400 Oil mass [kg]: 41,000 Problem Following a problem associated with excessive gas formation diagnosed by another supplier, the latter asked Sea Marconi to drain the oil, keep the transformers under vacuum for a specified period, then refill them with oil and carry out
Leia mais

Filling and dehydrating transformer oil France 2012 water in papers

Situation A global leader in the energy and infrastructure sector Technical specifications of transformer: Manufacturer: xxx Year: 2012 (new) Power [MVA]: 80 Voltage [kV]: 227/21/21 Oil mass [kg]: 26.700 Problem Following an initial request to fill the new transformer, when the Sea Marconi technicians arrived they noticed there was free water inside the transformer. This was due to the transformer
Leia mais

Tratamento físico do óleo em condições logísticas extremas Itália 2015

Cenário Empresa de produção hidroelétrica. O transformador está localizado nos picos do Adamello (Lombardia). Problema Dificuldades logísticas extremas relacionadas com o acesso ao local operacional: presença de mais de um metro de neve, inclinação elevada e altitude da estrada de acesso. O helicóptero é o único meio adequado para transportar os equipamentos de tratamento de óleo, o que implica restrições
Leia mais

Suécia 2012 PCB em óleo e transformador

Scenario Primary alluminiun factory: 8 Rectifier Transformers (Sweden) Nameplate data of transformers: Manufact: xxx Year: 1930 Power [MVA]: 19 Voltage [KV]: 13 Oil Mass [Kg]: 15.000 Oil type: mineral blended Solution Selective depolarization treatment (Chedcos) in order to remove the DBDS + dehalogenation treatment (CDP Process) in orderr to remove the PCBs both from oil and transformers. The treatments were performed on-site, on-line and on-load (transformer in servise and
Leia mais

PCBs e corrosão C2 e C4, logística extrema – França 2013

Scenario Hydro Power Plant The transformer is located near a river dam with extreme logistical and environmental constraints. The option of changing the oil was discarded immediately because of the enormous difficulties in handling (see. Photo) around the transformer. At the same time the fuller earth techniques would not solve the functional criticalities of the system “oil – transformer”. Nameplate
Leia mais

Remoção de PCBs e proteção ambiental – França 2012

Scenario Nameplate data of transformer: Trasformatore: grid transformer Manufact: xxx Year: 1970 Power [MVA]: 70 Voltage [KV]: 225 Oil mass [Kg]: 38.000 Solution Sea Marconi Dealogenazione (CDP Process®) treatment in order to remove the PCBs, performed on-load (this means that the transformer is in service and under load during the treatment) Trend of PCBs and chlorine content during the dehalogenation treatment (CDP Process)
Leia mais

Remoção de PCBs e proteção ambiental – França 2008

Scenario Nameplate data of transformer: Transformer: GSU transformer Manufact: xxx Year: 1974 Power [MVA]: 760 Voltage [KV]: 400 Oil mass [Kg]: 55.000 Problem See analytical results of the oil before treatment (table below) Soluzione Sea Marconi Solution: Dehalogenation treatment (CDP Process®) in order to remove the PCBs from the oil and transformer. Before treatment After treatment TAN [mg KOH/g] 0,029 < 0,010 Breakdown
Leia mais