Kit for sampling the oil from the transformer

The inspection and sampling phases can be done by Sea Marconi (if written in the contract) or by the client.

If the diagnostic activities foresees the Standard diagnostic Package, Sea Marconi will provide appropriate Sampling Kits to carry out oil sampling from the transformer and record the data on the appropriate inspection Sampling Card.

The Deos® sampling kit by Sea Marconi complies with the requirements of IEC EN 60475 and IEC EN 60567 and ensure:

  • the use of appropriate containers for the sampling type and the required tests;
  • dry and clean containers;
  • disposable containers when necessary;
  • the safety and protection of the sample during storage and transport;
  • traceability and reference of the sample to the container;
  • automatic compensation of the volume due to varying pressure and temperature;
  • even during air or naval transport, thereby maintaining the conditions of the sample;
  • a representative sample even for non-expert staff;
  • withdrawing the minimum amount of insulating liquid necessary to do the tests.

Sea Marconi has over 10 different types of kits depending on the chosen analysis or on the equipment to be sampled (Buchholz, transformers with pump, turbines and rotating machinery connections, etc.)!

Sampling kit types and items

The two most commonly used kits for withdrawing oils from the transformers are:

the “DeosTR kit”

Items

  • 1 Sampling Datasheet
  • 1 Glass syringe with a three-way valve plugged
  • 1 Flacone monouso single-use Flasks in PP (125 ml) at controlled cleanliness (for particles counting only)
  • 1 Plastic Bag including: 2 silicone pipes (about 40 cm), 1 three-way valve, 3 white caps, 1 luer plastic cap, single-use gloves, 1 label “Sampling point”.

Aim
Transformer diagnostics with standard Sea Marconi packs

the “DeosTR+ kit

Items

  • 1 Sampling Datasheet
  • 1 Glass syringe with a three-way valve plugged
  • 1 Flacone monouso single-use Flasks in PP (125 ml) at controlled cleanliness (for particles counting only)
  • 1 Aluminium bottle 1000 ml volume
  • 1 Plastic Bag including: 2 silicone pipes (about 40 cm), 1 three-way valve, 3 white caps, 1 luer plastic cap, single-use gloves, 1 label “Sampling point”.

Aim
Transformer diagnostics with standard Sea Marconi packs plus additional tests such as dielectric strength or corrosive sulphur

How to take the sample

Sea Marconi has recently created its own training course “Training for sampling insulating oils IEC 60475”

More information

Precisa de mais informações? Precisa de um orçamento?

Se você tiver alguma dúvida ou gostaria de receber um orçamento personalizado, estamos aqui para ajudar. Nossa equipe experiente está disponível para fornecer todas as informações que você precisa e para ajudá-lo a encontrar a melhor solução para suas necessidades. Entre em contato conosco hoje mesmo!

Success Stories

All Success Stories

You did not find what you were looking for?

Contact us to learn more about your case





    I read the privacy information and authorize the use of my personal data for the purposes specified therein.

    Insert this code: captcha