Tag: CDP Process

Scenario Nameplate data of transformer: Transformer: GSU transformer Manufact: xxx Year: 1974 Power [MVA]: 760 Voltage [KV]: 400 Oil mass [Kg]: 55.000 Problem See analytical results of the oil before treatment (table below) Soluzione Sea Marconi Solution: Dehalogenation treatment (CDP Process®) in order to remove the PCBs from the oil and transformer. Before treatment After treatment TAN [mg KOH/g] 0,029 < 0,010 BreakdownRead more

Scenario Utility – Power transformer of generation (nuclear, thermal, hydro), transmission and distribution with a total of 1.093 transformers. Namepale data of transformers: Power max [MVA]: 760 Voltage max [KV]: 400 Oil mass [Kg]: 75.000 each PCB max [mg/Kg]: 5.000 PCB target [mg/Kg]: < 20 (after 90 days) Solution Sea Marconi Solution: Dehalogenation treatment (CDP Process®) in order to remove the PCBs from oils and transformers. The treatmentsRead more

Scenario International Tender of the Electricity Authority of Cyprus for: “Elimination of PCBs from the insulating oil of distribution transformers”. In the 1997 Sea Marconi awarded the tender for decontaminate 520 transformers. Nameplate data of transformers: Power max [KVA]: 10-1000 Oil mass contaminated [Kg]: 94.000 PCB max [mg/Kg]: 15.000 PCB target [mg/Kg]: < 10 Solution Sea Marconi Solution: Dehalogenation treatment (CDP Process®) in order to removeRead more

Sea Marconi has recently started in Sweden a campaign for the decontamination treatment from PCBs with the ambitious target of 2 mg/Kg (ppm w/w). The activity, which shall have a total duration of about four months, involves the complete dehalogenation of 8 transformers with 15 tons of oil each at an important industrial site in Central Sweden. The Customer has chosen the “on-load” treatmentRead more

On 10th May 2012, at the Belgian Embassy in Tokyo, Sea Marconi responded to the needs of Japan in identifying a solution to the PCBs problem in front of qualified participants coming from industry and the public sector, Sea Marconi teamed with two excellent European companies, the Belgian SITA Decontamination and the Dutch Orion. The three companies formed the consortium EES (European Environmental Solution) to provide theRead more

The tests of the dehalogenation system (removal of PCBs from insulating oil of transformers) destined to Macedonia have been completed positively. Besides the supply of the system, the Sea Marconi’s solution includes a mix of high level products and services for the correct 360° management of the PCBs problem. From one side, the services for transferring the know-how, such educationRead more

Astana, capital of Kazakhstan, hosted from 13th through 16th Marchthe national workshop on the management under safe conditions of the life cycle of dangerous wastes. The event saw the participation of local and national authorities, holders of PCBs waste, private companies involved with the transportation, handling and stocking of dangerous wastes, laboratories, research institutes and organisations, non-government organisation as well as operators at internationalRead more

Upon the invitation of institutional authorities and local Utilities, on 18th April 2011, Vander Tumiatti travelled to Mongolia as expert in the management of electrical equipment with insulating oils and PCBs. The economy of Mongolia (2.736.800 inhabitants over a surface of 1.565.000 km²) is mainly based on considerable natural resources such as oil, coal and copper. Industry represents currently 21.4 %Read more

Following an invitation by institutional authorities and local Utilities, from 29th March through 1st April 2011, Vander Tumiatti was in the Philippines as an expert in the management of electrical equipment with insulating oils. The archipelago of the Philippines includes over 7,000 islands; the economy has a considerable expansion and for this reason, policies for energy efficiency are required toRead more

Monday 7th and Tuesday 8th February 2011, at the Sea Marconi Headquarters in Collegno (Turin) a meeting was held with a Japanese delegation interested to the Sea Marconi’s solutions for the management of transformers contaminated by PCBs in Japan. At the meeting participated Mr Toshihiko Takeo, general manager of JEMA, association of Japanese manufacturers in the electrical area, Mr YoRead more